DataCard ImageCard Magna User Manual page 48

3 8
-
•
•
Settings that control the non-printing operation of the printer are in the Properties
dialog box for the printer. These settings include:
•
•
Use the Properties dialog box
Make sure the printer power is on and the printer is connected to the PC.
1
2
3
4
Whether to apply topcoat or overlay material to the front of the card, back of the
card, or both
Magnetic stripe encoding formats and coercivity
The Default Document Properties dialog box also provides access to the About
dialog box, which shows the printer driver version.
Port to which the printer is attached
Permissions for other users of the PC
The SmartDriver provides help for the Default Document Properties dialog box,
and Windows NT provides help for the Properties dialog box. Help provides
information about specific settings of the printer driver. Help does not include step-
by-step procedures or detailed conceptual information.
Select Start from the Windows NT taskbar.
From the Windows NT Start menu, select Settings and then Printers. The Printers
window appears.
Click once on the SmartDriver icon.
Select File from the Printers menu bar, and then select Properties. The
SmartDriver Properties dialog box appears.
Figure 3-5: Properties dialog box, Windows NT
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™
Using the printer driver