Topcoat Material - DataCard ImageCard Magna User Manual

B-4
DuraGard
Smart card
overlay supply
1 mil
Holographic
overlay supply
0.6 mil
i
i
Custom holograms on topcoat or overlay material are available. Contact your
Datacard representative for more information.

Topcoat material

Use Datacard-approved topcoat material in the Magna Class printer, if the printer
includes an optional topcoat module. The following describes the topcoat supply to
use:
Part
Name
number
557171-102
547562-001
Datacard recommends that overlay patches not be applied over magnetic stripes
or signature panels.
Overlay can be applied to contactless (RF) smart cards.
Genuine Genuine
Genuine Genuine
Figure B-1: Genuine authentic holographic overlay or topcoat
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers
Description
Die-cut polyester patches, 1 mil
thick, on a carrier material.
Patches cover all of the card
except the area of the smart card
chip.
About 250 uses.
Die-cut polyester patches on a
carrier material with a tamper-
evident image.
About 250 uses.
Authentic Authentic Authentic Authentic
ICIV082U