Windows Nt - DataCard ImageCard Magna User Manual

Using the printer driver
6
7
Properties and Default Document Properties for Windows NT
Settings that control the printing and personalization of the card are in the Default
Document Properties dialog box for the printer. These settings include:
•
•
•
•
•
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers
If the setting you want to change does not appear, click the Advanced button to
display the Advanced Options dialog box
see all selections available. When you click a selection, a list of choices appears
next to the selection. Click the arrow on the box to see the selections available.
Figure 3-4: Advanced Options, Windows 2000 and XP
If the selections you want to use are not available (are grayed out), make sure the
feature is available in the printer. Also make sure that the printer is powered on
and connected to the PC, and then resume the Status Monitor. See
using the Status Monitor" on page
e-Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers.
To view help for settings, click on the What's This help button
any setting in the Printer Features list. A list of settings is displayed. Select the
setting for which you want help.
If you make changes or if this is the first time you have viewed the Printing
Preferences dialog box, click OK on each dialog box to save the settings and
close the dialog box.
Print on both sides (duplex printing)
Print ribbon type
Card design settings, such as landscape or portrait orientation
Topcoat pattern during the print cycle
Cleaning interval
(Figure 3-4). Click the plus sign (+) to
3-11. For a network-connected printer, see the
3-7
"Opening and
and then click