Chapter 6: Before You Install; Installation Audience; General Requirements - DataCard ImageCard Magna User Manual

Photo id printer
Hide thumbs Also See for ImageCard Magna:
Table of Contents

Advertisement

6
2
-

Installation audience

This manual is intended for persons using a Magna Class printer. To perform the
procedures in the installation section of this guide, you need the following skills:
If you do not feel comfortable with installing the printer, find a network support or other
technical professional to install the printer. Datacard-authorized service personnel
also use this information.

General requirements

When choosing a site for the Magna Class printer and its supplies, consider the
following general requirements:
Ability to read and understand written and graphical instructions
Experience and comfort installing hardware (such as a printer, scanner,
expansion card, etc.) in a personal computer (PC)
Experience with configuring applications and ports
Experience installing and using Microsoft® Windows® 98, Windows Me, Windows
2000, Windows XP, or Windows NT® (for Windows 2000, XP and NT the installer
must have administrator access to the PC)
Ability to perform simple troubleshooting using written and graphical instructions
Keep all dust, dirt, food, liquids, etc. away from the Magna Class printer at all
times.
Keep the top cover closed at all times, except when changing supplies, fixing
problems, or performing maintenance.
Do not use supplies or cards that have been dropped on the floor or have
otherwise become contaminated.
Keep paper and foreign materials off the Magna Class printer.
Place the Magna Class printer on a stable platform; keep it off the floor.
Place the Magna Class printer away from direct sunlight.
Place the Magna Class printer away from heating ducts, blowers, or other air
vents.
Do not use the Magna Class printer for purposes other than its intended use.
When cleaning around the Magna Class printer, prevent debris from entering the
printer.
Place the Magna Class printer in a clean office environment, protected from any
type of construction.
Store all supplies (ribbons, cards, etc.) in the original packaging until loaded in the
cartridges. Keep the original packaging closed.
Store all supplies in a clean, cool, dry location. See
on page B-9
and
"Supply roll storage" on page B-5
storage environment for Magna Class supplies.
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™
Before you install
"Card storage specifications"
for information about the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ultragrafix magna

Table of Contents