Operating Tips; Removing Cards - DataCard ImageCard Magna User Manual

2-18

Operating tips

•
•
•

Removing cards

The card output stacker holds both completed cards and rejected cards. Remove
completed cards from the output stacker to distribute printed cards. The output
stacker holds up to 100 cards with a nominal thickness of 0.030 inch (0.76 mm).
Remove rejected cards as soon as they are ejected from the printer so you do not
need to sort through all cards to locate them. Cards are rejected when a print job is
cancelled or when a problem occurs while personalizing a card.
You can remove cards when the printer power is on or off, or while the printer is
printing. Completed and rejected cards are removed in the same way.
Remove cards
1
2
For the most current information about messages, see the online help for each
message.
Whenever you are encoding magnetic stripe data or programming smart cards, be
sure to handle incomplete cards according to your policy for handling the
confidential data that might be on the card.
Used print ribbon contains negative images of data printed on cards. Be sure to
handle used print ribbon according to your policy for handling the confidential data
that might be on the card.
Lift the cards from the card output stacker.
Dispose of partly processed cards according to your policies for handling the
confidential data that might be on the cards.
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers
Figure 2-16: Remove cards
Using the printer