3
12
-
Open the Status Monitor
•
Viewing Status Monitor information
The Status Monitor displays the following status information:
•
•
•
•
•
Suspending the Status Monitor
Suspending the Status Monitor stops communication between the printer and driver.
To suspend the Status Monitor, double-click on the Status Monitor icon and select
Suspend. Suspend the Status Monitor before power off to avoid interrupted
communication.
Double-click on the Magna Status Monitor icon (see
Monitor appears.
The top line displays the current state of the Status Monitor or printer.
If the printer is directly connected to this PC, the second line displays any
messages. If the printer is shared through a network, this line indicates where to
find information about messages.
The third line displays the current port mode, which can be ECP, USB, Shared
Mode, or Directly Networked.
The fourth line displays the printer type.
The lower half of the dialog box shows the driver version number.
You cannot suspend the Status Monitor while printing a card.
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™
Figure 3-8: Status Monitor
Using the printer driver
Figure
3-7). The Status