DataCard ImageCard Magna User Manual page 108

7-4
12 If you use the printer security lock, wrap the cable through a secure opening,
Figure 7-3: Move the top cover support down
b Lift an edge of the packing tape and pull it off the swing arm and chassis
(Figure 7-4). Discard the tape.
Figure 7-4: Remove the printhead packing tape
insert the lock through the loop, and then insert the lock in the printer security lock
receptacle.
User's Guide for ImageCard® Magna™ and UltraGrafix® Magna™ Printers
2
1
Optional laminator module
Install the printer