Chapter 1: Installation - DataCard CE870 Installation And Administrator's Manual

Chapter 1: Installation

This chapter describes network requirements, site requirements,
electrical requirements, and installation instructions for the Datacard®
CE870™ Instant Issuance System.
The components are shipped in several containers. Make sure that you have all components,
including those not supplied, before you start the installation. Items not supplied in the shipping
cartons include Ethernet cable(s) and bolt-down supplies.
This chapter provides information about the CE system installation, including:
PC Requirements

Ethernet Requirements

Electrical Requirements

Site Requirements

Set Up the System

Load Supplies

Power On the System

Use the Front Panel

Activate the System from the LCD Menu

Configure the Printer

Test the System Using a Local Network

Run Test Cards

Verify Features of the Test Cards

Connect the System to the Network

Configure Network Settings

Finish Setup

CE870 Instant Issuance System Installation and Administrator's Guide
on page 2
on page 2
on page 2
on page 3
on page 6
on page 16
on page 23
on page 23
on page 26
on page 32
on
on page 39
on page 43
on page 24
on page 29
page 35
on page 38
1