Viewing General Summary Information - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
Figure 3-3.
2. Enable the SysLog option if you have a SysLog server on your LAN. If enabled, you must
enter the IP address of your SysLog server and the port number your SysLog server is
configured to use:
a. SysLog Server IP address – The access point will send all the SysLog this IP address if the
SysLog option is enabled. Default: 0.0.0.0
b. Port – The port number configured in the SysLog server on your LAN. Default: 514
3. Click Apply to save your Syslog settings.
The Activity Log Window displays the Access Point system activity.
Click Refresh to update the display or click Save As to save the log contents into a file on your
PC.

Viewing General Summary Information

The General information screen provides a summary of the current configuration settings and
statistics of your ProSafe 802.11g. This information is read only, so any changes must be made on
other screens.
3-4
v4.0, April 2006
Management