Table of Contents
Advertisement
Preliminary
3.2
Configuring the AP through Web Browser
The following procedures show the steps to configure the channel frequency and SSID
using a web browser:
1. Launch a web browser (Netscape Navigator or Internet Explorer are examples of
commonly used web browsers) from the Host PC or other PC on the same IP
subnet as the AP, and enter the IP address that is assigned to the AP as the URL.
This is the "inet on ethernet (e)" value specified during the configuration step in
Section 3.1.1 or Section 3.1.2. The Access Point Web Server page appears.
Access Point User's Guide • Page 11
Advertisement
Table of Contents
