5 Upgrading an Existing G700 with an S8300: On site Preparation for the Upgrade
1.
At the command prompt, type almenable -d n -s n , where
-d n sets the dialout option to neither (number)
-s n disables SNMP alarm origination
Note: Be sure to reset alarm origination as after the upgrade.
2.
Type almenable (without any options) to verify that alarm origination has been disabled.
Determine Necessary Upgrades to the S8300
Note: If you are using the LSP/G700 Upgrade Tool, the Upgrade Tool performs this task
automatically.
Log in to the Web interface on the S8300.
1.
2.
Choose
View Software Version
S8300 main menu.
The S8300 displays the View Software Version screen.
View Software Version Screen
Check the Contains field for the version number of Communication Manager. If your planning
3.
documentation has a higher number, you must install new software.
Check the Release String field for the version number of the S8300 software. If your
4.
planning documentation has a higher number, you must install new software.
218
under Server Configuration and Upgrades on the left pane of the
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003