Avaya G700 Installation And Upgrades page 27

!
CAUTION:
You must still complete the normal prerequisite tasks such as completing the RFA process
for license files and uploading the most recent .tar file (for an LSP) to the /var/home/ftp
directory or uploading the most recent firmware (for a G700 Media Gateway) to a TFTP
server.
!
CAUTION:
You cannot use the LSP/G700 Upgrade Tool to do the following:
- Install a new LSP or G700 Media Gateway. For each new installation, you must be on site and
use the Avaya™ Installation Wizard (for an LSP), the Avaya Gateway Installation Wizard
(for a G700 Media Gateway controlled by an S8700 Media Server), or perform a manual
installation.
- Upgrade LSPs to Avaya™ Communication Manager 1.3. An LSP must already have
Communication Manager 1.3 or higher. Thus, the Upgrade Tool is used for upgrades to
software higher than Communication Manager 1.3.
- Apply Communication Manager patches to LSPs. To apply patches, you must telnet into the
LSP and use the Linux command line commands for patches.
- Upgrade X330 Expansion modules.
- Upgrade the active S8700 Media Server acting as the primary controller or its duplicated
server.
- Upgrade the S8300 Media Server acting as the primary controller.
!
CAUTION:
To use the upgrade tool, both the S8700 or S8300 primary controller must already have
Communication Manager Release 1.3 or higher software. In addition, any LSPs to be
upgraded must also have Communication Manager Release 1.3 or higher software.
The LSP/G700 Upgrade Tool ships with the S8300 and S8700 Media Servers and is available on the Media
Server's Web interface home page. For more information, see the LSP/G700 Upgrade Tool Job Aid and
Pre-Upgrade Worksheet.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
1 Roadmap and Reference: Wizards for Installations and Upgrades
27