Set The Lsp Transition Points - Avaya G700 Installation And Upgrades

3 Installing a New G700 with an S8300: Configure the G700 Media Gateway
3 . Select Yes
The G700 Media Gateway processor will reset. The LEDs on the G700 Media Gateway and the
Media Modules will flash. These elements will each conduct a series of self-tests. When the LEDs
on the Media Modules are extinguished and the active status LEDs on the G700 Media Gateway
are on, the reset is complete.
The system ultimately returns you to the P330-1 (configure) prompt.
At the P330-1(configure)# prompt, type session mgp.
At the MG-001-1(super)# prompt, type configure to change to the configuration mode.
Note: Because the G700 media gateway has registered with its primary controller, the
prompt name has changed; for example, to MG-001-1.
Type show mgc to display the list of available servers and their IP addresses.
For example:
Show Call Controller Status Screen
MG-001-1(configure)# show mgc
CALL CONTROLLER STATUS
------------------------------------------
Registered
Active Controller
H248 Link Status
H248 Link Error Code: 0x0
MGC List Management : Static
CONFIGURED MGC HOST
--------------------
135.9.71.95
- Not Available --
- Not Available --
- Not Available --
The Gateway will have registered with the primary controller, if present. If the primary controller
is running and has been administered properly, the Registered field says
Link Status says
H248 Link Status says

Set the LSP Transition Points

You must set the time that the G700 searches, in the event of a network problem, for primary controllers (for
example, additional CLAN connections) with which to register. After this search time has elapsed, the G700
will search for an LSP with which to register. You must also set the total time the G700 searches for either a
130
at the dialog box that asks if you want to continue.
: YES
: 135.9.71.95
: UP
. If the controller is not running, the Registered field says
UP
DOWN
Installation and Upgrades for G700 with S8300 or S8700
DHCP SPECIFIED MGC HOST
-----------------------
-- Not Available --
-- Not Available --
-- Not Available --
-- Not Available --
.
555-234-100 — Issue 3 — May 2003
YES and the H248
and the
NO