Avaya G700 Installation And Upgrades page 112

3 Installing a New G700 with an S8300: Configure the S8300
7. Click Continue
The
Configure Ethernet Interfaces
Configure Ethernet Interfaces Screen
Use your planning forms to complete the fields for the:
8.
-
IP Address
-
Gateway
- Subnet Mask
- Speed
!
CAUTION:
Do not guess on the addresses on this screen. If you enter the wrong addresses, service will
be disrupted across the customer's network and may be difficult to correct.
Click
9. Continue
The Configure Local Survivable Processor screen appears.
112
.
screen appears.
assigned to the S8300 Media Server. Check your planning forms.
with the IP address of the default gateway of the subnet.
with the value of the subnet mask of the hosting subnet.
which should be set to Auto Sense.
.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003