Avaya G700 Installation And Upgrades page 147

IP Network Region Screen
change ip-network-region 1
Region: 1
Name:
Audio Parameters
Codec Set: 2
Location:
UDP Port Range
Min: 2048
Max: 65535
DiffServ/TOS Parameters
Call Control PHB Value: 34
VoIP Media PHB Value: 0
BBE PHB Value: 43
802.1p/Q Enabled? N
Complete the fields as described in '' Administration for Network Connectivity for Avaya™
2.
Communication Manager, 555-233-504.''
Note: It is strongly recommended to use the defaults in the screen.
If the network region of the G700 (1 in this example) is different from that of the S8700 CLAN
3.
board(s), you must interconnect the two regions. Press
Network Region Connection Management.
The S8700 displays page 2 of the IP Network Region screen. This screen shows a matrix of 250
network region numbers — 8 rows of 32 columns (only 26 columns are active in the last row). A
region number is determined by the row and column cell position in the matrix. For example,
region number 80 is the cell in the 3rd row (labled 65-96) and the 15th column (labled 5).
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
3 Installing a New G700 with an S8300: Administer Communication Manager
IP Network Region
Direct IP-IP Audio Connections? n
RTCP Monitor Server Parameters
Use Default Server Parameters? y
Resource Reservation Parameters
IP Audio Hairpinning? y
RTCP Enabled? n
RSVP Enabled? n
NextPage to complete page 2, Inter
Page 1 of 3
147