Administration Task Summary (For The S8300 Media Server) - Avaya G700 Installation And Upgrades

7 Connecting Telephones and Adjunct Systems: ASAI Co-Resident DEFINITY LAN Gateway (DLG)
Administration Task Summary (for the S8300
Media Server)
On the SAT interface of the S8300 Media Server with G700 Media Gateway, follow these steps:
1 . Type display system-parameters customer-options. Go to page 4 and make sure that Processor
Ethernet is enabled.
2 . Type display ip-interfaces, and make sure the PROCR is administered and its Ethernet port is
enabled. If the PROCR is not listed (PROCR should appear in the Type option field), add the
PROCR.
To administer CTI links:
1 . Use the display system-parameters customer-options command and make sure the following
option is set to yes:
Co-Res DEFINITY LAN GATEWAY
2 . Use the add cti-link command to administer a CTI link.
3 . Use the change ip-services command and specify a Service Type of DLG.
When Service Type DLG is entered, the system adds a DLG Administration page as the last of the
form.
4 . Complete the DLG Administration page to add your client information.
Note: A CTI link must be administered before a link number can be entered. For more
information and detailed procedures, refer to CallVisor
Reference, 555-230-220.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
(y)
®
ASAI Technical
275