Avaya G700 Installation And Upgrades page 36

1 Roadmap and Reference: Installation Roadmap and Task Lists
Checklist 3. Task List to Upgrade an Existing G700 with an S8300 (Primary or LSP)
"Configure the Server" on page 229
"Upgrade the Firmware on the G700"
on page 230
"Complete the Upgrade Process (S8300
is the Primary Controller)" on page 237
36
- Click Continue on each page of the configuration wizard
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
- Install firmware on the G700 media gateway processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or network, if any
- Check media modules
- Enable scheduled maintenance
- Enable TTI
- Check TTI status
- Busy out trunks
- Resolve alarms
- Check for translation corruption
- Back up system
- Re-enable alarm origination
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003