An S8300 - Avaya G700 Installation And Upgrades

Checklist 4:
Upgrade an Existing G700 without

an S8300

Use the following checklist to upgrade a G700 Media Gateway with the following characteristics:
• The G700 does not have an S8300 and is controlled by an external S8300 or S8700 Media Server.
You will use Chapter 6 with this checklist. For help with connecting to and logging in to the G700, see
Connection Methods
Checklist 4. Task List to Upgrade an Existing G700 without an S8300
Task
"Upgrade Overview" on page 239
"Before Going to the Customer Site" on
page 241
"Installing Hardware for the G700 Media
Gateway and S8300 Media Server" on
page 61
"On Site Preparation for the Upgrade" on
page 245
"Install New Firmware on the G700
Media Gateway" on page 248
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
1 Roadmap and Reference: Installation Roadmap and Task Lists
in this chapter.
Subtasks (If any)
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Download firmware files
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
- Verify contents of the tftp directory
- Determine which firmware to install
- Install firmware on the P330 stack processor
- Install firmware on the G700 media gateway processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or network, if any
37