Avaya Site Administration; Configure Avaya Site Administration; Issue 3 — May - Avaya G700 Installation And Upgrades

Note: The Device Manager is not available through the S8300 Media Server. You must
be connected to either the P330 Stack Processor or G700 Media Gateway
processor through the corporate LAN.
A GUI rendering of the stack devices appears. Proceed with Media Gateway or stack device
3.
administration.

Avaya Site Administration

Avaya Site Administration is part of the Avaya VisAbility Suite Standard Plus package. Normally,
the customer can simply select Download next to the Administration item on the Media Server Home
Page to download Avaya Site Administration. The customer then follows the directions presented by
the download/installation wizard.

Configure Avaya Site Administration

When Avaya Site Administration is initially installed on a client machine, it needs to be configured to
communicate with Communication Manager on the S8300 Media Server.
When it runs initially, after downloading, you need to create a new entry for the switch connection.
To create new entries for the switch, follow the procedure
Item" on page
Adding an S8300 Switch Administration Item
Click
1. File > New > Voice System
The system displays the Add Voice System window.
Enter a name in the Voice System Name: field. As a technician configuring Avaya Site
2.
Administration on your laptop, use a generic name, as you will be able to use this connection item
for all S8300 Media Servers.
Click
3. Next
4. Click the Network connection
Click
5. Next
6. Enter the IP address used to connect to the S8300.
Click
7. Next
8. TCP/IP Port Number: For the port number, ALWAYS use port
for the customer login.
5023
9. Click Next
values for the timeout parameters.
10. Click Next
Click the "
11.
12. Click Next
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
57.
.
. The connection type dialog box displays.
radio button.
. The Network Connection dialog box displays.
. The Network Connection/Port Number dialog box displays.
. The Network Connection/Timeout Parameters dialog box displays. Leave the default
. The login type dialog box displays.
I want to login manually each time
. The switch summary dialog box displays.
1 Roadmap and Reference: Connection and Login Methods
"Adding an S8300 Switch Administration
" radio button.
23 for the craft login. Use port
57