Chapter 4 Installing A New G700 Without An S8300 - Avaya G700 Installation And Upgrades

4
Installing a New G700 without
an S8300
This chapter covers the procedures to install the firmware on an new Avaya
an Avaya S8300 Media Server. The G700 is controlled by an external primary server running Avaya
TM
Communication Manger. The primary server can be either an Avaya
residing in another G700.
Note: Procedures to install or upgrade an S8700 Media Server are not covered in this
document. See Avaya
Avaya Support website (http://www.avaya.com/support) or on the CD, 555-233-
825.
Note: If you are using the Avaya Gateway Installation Wizard (GIW), the GIW performs
these tasks automatically:
Components
Connections
configure an X330 Expansion module. This task you must still perform as
described in this document.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
TM
S8300 and S8700 Media Server Library, which is on the
Assign the IP Addresses of the G700 Media Gateway
,
Set up the Controller List for the G700 Media Gateway
, and Set the LSP Transition Points
G700 Media Gateway without
TM
S8700 Media Server or an S8300
TM
,
Check for IP
sections. However, the GIW does not
TM
161