Configure Local Survivable Processor Screen
10.
Select one of the following options:
- This is NOT a survivable remote processor.
- This is a local survivable processor (LSP) with an S8700 media server as the primary
controller.
- This is a local survivable processor with a S8300 media server as the primary controller.
11.
If you clicked the LSP option with an S8700, complete the additional fields as follows:
CLAN IP address of the primary controller —
S8700 media server configuration.
IP address of server 1 (required) —
IP address of server 2 (optional) —
If server 2 is present, this specific IP address must also be entered.
IP address of secondary server 1 (optional) —
server.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
3 Installing a New G700 with an S8300: Configure the S8300
Enter the IP address of any CLAN board in the
Enter the IP address of the primary S8700 server.
Enter the IP address of the duplicated primary S8700 server.
Enter the IP address of the secondary S8700
113