Setting The Dscp Value For Ipv6 Dns Packets; Displaying And Maintaining Ipv6 Dns - HP 10500 Series Configuration Manual

Step
2. Enable dynamic domain
name resolution.
3. Specify a DNS server.
4. Configure a DNS suffix.
For more information about the dns resolve and dns domain commands, see Layer 3—IP Services
Command Reference.

Setting the DSCP value for IPv6 DNS packets

NOTE:
This feature is available in Release 1203 and later versions.
Step
1. Enter system view.
2. Set the DSCP value for
IPv6 DNS packets sent by
the IPv6 DNS.

Displaying and maintaining IPv6 DNS

Task
Display the static IPv6 domain
name resolution table.
Display IPv6 DNS server
information.
Display DNS suffixes.
Display the information of
dynamic IPv6 domain name
cache.
Clear the information of
dynamic IPv6 domain name
cache.
For more information about the display dns domain, display dns host ipv6, and reset dns host ipv6
commands, see Layer 3—IP Services Command Reference.
Command
dns resolve
dns server ipv6
ipv6-address
[ interface-type
interface-number ]
dns domain domain-name
Command
system-view
dns ipv6 dscp dscp-value
Command
display ipv6 host [ | { begin | exclude | include }
regular-expression ]
display dns ipv6 server [ dynamic ] [ | { begin |
exclude | include } regular-expression ]
display dns domain [ dynamic ] [ | { begin |
exclude | include } regular-expression ]
display dns host ipv6 [ | { begin | exclude |
include } regular-expression ]
reset dns host ipv6
148
Remarks
Disabled by default.
Not specified by default.
If the IPv6 address of a DNS server is a
link-local address, you need to specify the
interface-type and interface-number arguments.
Optional.
Not configured by default. Only the provided
domain name is resolved.
Remarks
N/A
Optional.
By default, the DSCP value in IPv6
DNS packets is 0.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.