Display Info-Center - HP 6125G Command Reference Manual

channel number:0, channel name:console
MODU_ID NAME
ffff0000 default
The output shows that the system is allowed to output log information with a severity from 0 to 4, trap
information with a severity from 0 to 7, and debug information with a severity from 0 to 7 to the console.
The information source modules are all modules (default).
Table 8 Command output
Field
channel number
channel name
MODU_ID
NAME
ENABLE
LOG_LEVEL
ENABLE
TRAP_LEVEL
ENABLE
DEBUG_LEVEL

display info-center

Syntax
display info-center [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display info-center to display information center configuration information.
ENABLE LOG_LEVEL
Y informational
Description
Channel number, in the range of 0 to 9.
Channel name. For more information, see info-center channel name.
ID of the source module.
Name of the source module.
"default" means all modules are allowed to output system information, but
the actual permitted modules depends on the switch model.
Indicates whether log output is enabled, Y or N.
Log information severity. See
Indicates whether trap output is enabled, Y or N.
Trap information severity See
Indicates whether debug output is enabled, Y or N.
Debug information severity. See
ENABLE TRAP_LEVEL
Y debugging
Table 10
Table 10
Table 10
30
ENABLE DEBUG_LEVEL
Y debugging
for details.
for details.
for details.