Display Ssh Server-Info - HP 3600 v2 Series Command Reference Manual

Examples
# Display the source IP address or source interface of the SSH client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1

display ssh server-info

Syntax
display ssh server-info [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ssh server-info command on a client to display mappings between SSH servers and their
host public keys on an SSH client.
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, you can use this command to check the public key
of the server saved on the client.
Related commands: ssh client authentication server.
NOTE:
This command is also available on an SFTP client.
Examples
# Display the mappings between host public keys and SSH servers saved on the client.
<Sysname> display ssh server-info
Server Name(IP)
______________________________________________________
192.168.0.1
192.168.0.2
Table 43 Output description
Field
Server Name(IP)
Server public key name
abc_key01
abc_key02
Description
Name or IP address of the server
257