Appendix E Cable And Wire Guidelines And Specifications For The M7I Router; Fic Specifications For The M7I Router; Table 24: Fic Specifications - Juniper M7I Hardware Manual

APPENDIX E
Cable and Wire Guidelines and
Specifications for the M7i Router

FIC Specifications for the M7i Router

Table 24: FIC Specifications

Interface Type
2-port Fast
Ethernet FIC
1-port Gigabit
Ethernet FIC with
SX SFP
Copyright © 2010, Juniper Networks, Inc.
The FIC and the various PICs supported on the router accept different kinds of network
cable, including multimode and single-mode fiber-optic cable. For more information, see
the following topics:
FIC Specifications for the M7i Router on page 173
Fiber-Optic Specifications and Guidelines for the M7i Router on page 174
Routing Engine Interface Cable and Wire Specifications for the M7i Router on page 179
Table 24 on page 173 lists the specifications for the type of network cable accepted by
the FIC. For information about the network cables for the PICs in your router, refer to the
M7i Multiservice Edge Router PIC Guide.
Cable
Specification Cable Supplied
RJ-45 No
connectors (one
for each port);
MDI
noncrossover
Duplex LC No
Maximum Router
Length Receptacle
328 ft (100 m) RJ-45
656 ft/200 m LC
reach on
62.5/125
micrometer
multimode fiber
(MMF) 1640
ft/500 m reach
on 50/125
micrometer MMF
173