Deleting A User Code - Ricoh C3030 Operating Instructions Manual

Deleting a User Code

This section describes how to delete a user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Press [Delete].
E
Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
F
Press [Auth. Info].
G
Press [Change] to delete the user code, and then press {q} key.
H
Press [OK].
I
Press [Exit].
J
Press the {User Tools/Counter} key.
Authentication Information
7
213