Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1256

show ip slb probes
The name of a probe that is not an HTTP/HTTPS probe is specified:
-> show ip slb probes mail_server
Probe mail_server
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
The name of an HTTP/HTTPS probe is specified:
-> show ip slb probes phttp
Probe phttp
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
Username
Password
Expect
Status
URL
Output fields are described here:
output definitions
Probe
Type
Period
Timeout
Retries
Port
Username
Password
Expect
Status
URL
Release History
Release 7.1.1; command introduced.
page 20-48
= SMTP,
= 60,
= 3000,
= 3,
= 0,
= HTTP,
= 60,
= 3000,
= 3,
= 0,
= ,
= ,
= ,
= 200,
= /,
The user-specified name of the probe.
The type of probe.
The period (in seconds) to check the health of servers.
The timeout (in seconds) used to wait for probe answers.
The number of probe retries before deciding that a server is out of
service.
The TCP/UDP port on which the probe is sent.
The configured user name sent to a server as credentials for an HTTP
GET operation for the probe.
The configured password for the probe.
The configured ASCII string used to compare a response from a server
to verify the health of the server.
The expected status returned from an HTTP GET to verify the health of
a server.
The configured URL sent to a server for an HTTP GET to verify the
health of the server.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide March 2011