Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1251

Server Load Balancing Commands
output definitions (continued)
Oper status
Probe
Availability time (%)
Ping failures
Last ping round trip time
(milliseconds)
Probe status
Release History
Release 7.1.1; command introduced.
Related Commands
show ip slb servers
show ip slb clusters
show ip slb cluster
OmniSwitch CLI Reference Guide
The operational state of this server. The possible states are described as
follows:
•
Disabled (this server is administratively disabled).
•
No Answer (this server has not responded to ping requests).
•
Link Down (there is a bad connection to this server).
•
In Service (this server is used for SLB cluster client connections).
•
Discovery (the SLB cluster is pinging this physical server).
•
Retrying (the SLB cluster is making another attempt to bring up
this server).
The name of the probe configured for this server.
The percentage of time that this physical server has been available for
processing client requests. In other words, the actual ratio of up time
(In Service plus Retrying) versus down time (No Answer plus Link
Down). Please note that the Disabled and the initial Discovery states
are not counted as down time.
The total number of pings that have failed on this physical server.
The total amount of time (in milliseconds) measured for the last valid
ping to this physical server to make a round trip.
The status of the probe configured for this server.
Displays the status of all physical servers belonging to Server Load Bal-
ancing clusters on a switch.
Displays detailed status and configuration information for all Server
Load Balancing clusters on a switch.
Displays detailed status and configuration information for a single
Server Load Balancing cluster.
March 2011
show ip slb cluster server
page 20-43