Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1247

Server Load Balancing Commands
output definitions
Cluster
VIP
Type
Admin status
Operational status
Ping period (seconds)
Ping timeout (milliseconds)
Ping retries
Probe
Number of packets
Number of servers
Server
Admin Status
Operational Status
Availability (%)
OmniSwitch CLI Reference Guide
The name of this Server Load Balancing (SLB) cluster.
The virtual IP (VIP) address for this Server Load Balancing (SLB)
cluster.
The classifier for the hypothetical packet, which can be L2 or L3.
The current administrative status of this Server Load Balancing (SLB)
cluster (Enabled or Disabled).
The current operational status of this Server Load Balancing (SLB)
cluster, which is In Service (at least one physical server is
operational in the cluster) or Out of Service.
The ping period (in seconds) used by this Server Load Balancing (SLB)
cluster to check the health of physical servers.
The timeout (in milliseconds) used by this Server Load Balancing
(SLB) cluster to wait for ping answers from physical servers.
The number of ping retries that this Server Load Balancing (SLB)
cluster executes before switching the status to No answer.
The probe configured for this cluster.
The number of packets balanced for this Server Load Balancing (SLB)
cluster.
The total number of physical servers that belong to this Server Load
Balancing (SLB) cluster.
The IP address for this physical server.
The administrative state of this physical server (Enabled or Disabled).
The operational state of this server. The possible states are described as
follows:
•
Disabled (this server is administratively disabled).
•
No Answer (this server has not responded to ping requests).
•
Link Down (there is a bad connection to this server).
•
In Service (this server is used for SLB cluster client connections).
•
Discovery (the SLB cluster is pinging this physical server).
•
Retrying (the SLB cluster is making another attempt to bring up
this server).
The percentage of time that this physical server has been available for
processing client requests. In other words, the actual ratio of up time
(In Service plus Retrying) versus down time (No Answer plus Link
Down). Please note that the Disabled and the initial Discovery states
are not counted as down time.
March 2011
show ip slb cluster
page 20-39