Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 1363

IP Multicast Switching Commands
-> show ipv6 multicast vlan 1
Status:
Querying:
Proxying:
Spoofing:
Zapping:
Querier Forwarding:
Version:
Robustness:
Query Interval (seconds):
Query Response Interval (milliseconds):
Last Member Query Interval (milliseconds):
Unsolicited Report Interval (seconds)
Router Timeout (seconds):
Source Timeout (seconds):
output definitions
Status
Querying
Proxying
Spoofing
Zapping
Querier Forwarding
Version
Robustness
Query Interval (seconds)
OmniSwitch CLI Reference Guide
Whether the IPv6 Multicast Switching and Routing is Enabled or Dis-
abled (the default status).You can enable or disable IPv6 Multicast
Switching and Routing with the
mand, which is described on
The current state of MLD querying, which can be Enabled or Disabled
(the default status). You can enable or disable MLD querying with the
ipv6 multicast querying
The current state of MLD proxying on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
MLD spoofing with the
described on page 21-82
The current state of MLD spoofing on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
MLD spoofing with the
described on page 21-37
The current state of MLD zapping on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
MLD zapping with the
described on page 21-80
The current state of MLD querier forwarding on the system, which can
be Enabled or Disabled (the default status). You can enable or disable
MLD Querier forwarding with the
command, which is described on
Displays the default MLD version, which can be 1, 2 or 3. Use the
multicast version
Displays the MLD robustness value, ranging from 1 to 7. Use the
multicast robustness
Displays the time (in seconds) between MLD queries. (The default
value is 125 seconds). You can modify this parameter with the
ipv6 multicast query-interval
21-62.
March 2011
= Enabled
= Disabled
= Disabled
= Disabled
= Disabled
= Disabled
= 1
= 2
= 125
= 10000
= 1000
= 1,
= 90
= 30:
ip multicast helper-address
page 21-43
command, which is described on
ipv6 multicast proxying
ipv6 multicast spoofing
ipv6 multicast zapping
ipv6 multicast querier-forwarding
page 21-46.
command to modify this parameter.
command to modify this parameter.
command, which is described on
show ipv6 multicast
com-
page 21-74
command, which is
command, which is
command, which is
ipv6
ipv6
page
page 21-105