Group Calling Message-Waiting Indicator - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Group Calling Message-Waiting Indicator

Group Calling Message-Waiting
Indicator
Use this procedure to designate the extension that will receive
message-waiting indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for
each calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver
cannot distinguish between messages left for the calling group and personal
messages.
Summary: Group Calling Message-Waiting
Indicator
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 7d, Group Calling
No message-waiting receiver assigned
Extension number
No
No
More
Extensions
calling group ext. no.
receiver
Enter
[F6] [PgUp] [F4]
[F10] Type ext. no. for MWI receiver
Optional Group-Assigned Features 14-15
Grp Calling
Dial ext. no. for MWI
Enter
Exit Exit
[F4] Type calling group ext. no.
Dial
Message
[F10] [F5] [F5]