Message Waiting - AT&T SYSTEM 25 User Manual

Message Waiting

Most voice terminals have a light that indicates a waiting
message. There may be an associated
you can press to turn off the light after you receive messages. If
your voice terminal does not have a
ask the person who left the message waiting signal to turn it off.
If you have a
waiting lights on voice terminals for which you provide
Individual Call Coverage.
Turning Off Your Message Waiting Light
1 Press
Sending a Message Waiting Signal While on an
Individual Call Coverage Call
1 Answer the call and take a message.
2 Press
3 Hang up.
Sending a Message Waiting Signal When
Not on a Call Coverage Call
1 Lift the handset and listen for dial tone.
2 Press
3 Dial the PDC of the voice terminal you want
4 Listen for
30
button, you can control the message
M E S S A G E
.
to signal.
confirmation tone and then
hang up.
button, which
M E S S A G E
button, you must
M E S S A G E
if it is not lit.
,
(Continued)