Fax Message-Waiting Receiver - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

Telephone and Extension Features
3. If Remote Call Forwarding is enabled, do one of the following:
If you wish to disable the Forwarding Delay option, enter
Delay (0-9) column under the Remote Call Forwarding heading on
Form 6b. This causes incoming calls to be forwarded immediately.
If wish to enable the Forwarding Delay option for an extension, enter
the number of times an incoming call should ring at the called
extension (1–9 rings) before the incoming call is forwarded.
NOTES:
1. If Do Not Disturb (DND) and Forwarding Delay are both active,
2. Due to the timing of when the ringing signal is applied to a

Fax Message-Waiting Receiver

Use these instructions only when the system has fax machines connected
directly to the control unit by way of an 008 OPT, 016, or 012 module or
connected to an MLX telephone using a Multi-Function Module (MFM).
Otherwise, skip to the next section, "Operator Features."
Fax machines cannot use General-Purpose Adapters (GPAs) because they
cannot auto dial through the GPA.
This section contains instructions to designate from one to four telephones to
receive message-waiting indications when a fax is received on a specific fax
machine, and to specify the length of time before the system assumes a fax has
arrived and sends the message-waiting indication.
Planning Form Instructions
Use Form 6d to identify up to 16 fax machine extension numbers and up to four
receiver extension numbers for each fax number.
The System Notification Threshold setting can be left at the factory default of 10
seconds or be changed and identified on the line at the top of the form for up to
30 seconds.
NOTE:
You will fill in the rest of the optional telephone features later.
DND overrides the Forwarding Delay and the call is forwarded
immediately.
Single-line telephone, and the interval of that ringing signal,
Single-line telephones may appear to have their calls forwarded
one ring less than the administered number.
0 in the
4–7
Features