Group Calling External Alert For Calls-In-Queue Alarm - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Group Calling External Alert for Calls-In-Queue Alarm

Group Calling External Alert for
Calls-In-Queue Alarm
Use this procedure to designate the external alert device used to notify calling
group members when the number of calls in the queue reaches the
programmed threshold.
Only one external alert device can be designated for each calling group.
Since the external alert signal is continuous, it is recommended that only
light-type external alert devices be designated for the Calls-in-Queue alarm.
Summary: Group Calling External Alert for
Calls-In-Queue Alarm
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 7d, Group Calling
Not applicable
Extension number
No
No
More
Extensions
calling group ext. no.
alert
Enter Exit
[F6] [PgUp] [F4]
[F10][Alt] + [P] Type ext. no. for alert
Optional Group-Assigned Features 14-17
Grp Calling Xtnl Alert
Drop
Enter
Exit
[F7] Type calling group ext. no.
[F10]
Dial
Dial ext. no. for
[F5] [F5]