AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual page 34

Programming Information
Procedure Summary Contents
Each programming summary contains a general description of the feature
and provides the following programming information.
Programmable by
Mode
Idle condition
Planning form
Factory setting
Valid entries
Inspect
Copy option
Console Procedure
PC Procedure
1-8 Programming Basics
Indicates who has permission to use the procedure.
Specifies which system mode supports the procedure:
Key, Hybrid/PBX, Behind Switch, or a combination
Specifies the idle state required before the procedure
can be performed.
Indicates the planning forms that provide information for
the procedure.
Shows the default settings, if any, for equipment or
features affected by the procedure.
Specifies the characters, numbers, or values accepted
during data entry.
Specifies whether or not the feature status can be
verified using the Inspect feature.
Indicates whether or not the feature programmed with
the procedure can be copied to another system
component.
Provides a summary of the procedure steps using the
system console.
Provides a summary of the procedure steps using SPM.