Attendant Message Waiting - AT&T SYSTEM 25 User Manual

Attendant Message Waiting

You can use a Message light to notify voice terminals of
waiting messages. When you call a voice terminal, the
status light next to your <ATTENDANT MESSAGE
WAITING> button will have the same on/off condition as
the Message light on the voice terminal you call. Most
voice terminals have a button associated with their Message
light so that users can turn off their own lights. If a voice
terminal does not have this button, you must turn off the
Message light from your console.
Sending a Message Waiting Signal While Ringing the
Voice Terminal
1. Press <ATTENDANT MESSAGE WAITING> if its light
is not on.
2. Continue with the call or hang up.
Sending a Message Waiting Signal Without Ringing the
Voice Terminal
1.
Lift the handset and listen for dial tone.
2. Press <ATTENDANT MESSAGE WAITING>.
3. Dial the PDC of the voice terminal.
4.
Listen for confirmation tone and then hang up.
Turning Off a Message Waiting Signal While Talking to
the Person
1. Press <ATTENDANT MESSAGE WAITING> if its light
is on.
Continued
15