Block Renumbering - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Block Renumbering

Block Renumbering
Use this procedure to assign extension numbers to a group of extensions,
accessories, or lines. Both the original numbers and the numbers they are
being changed to must be sequentially numbered.
When required, this procedure should be performed immediately following the
selection of a system numbering plan.
CAUTION:
Select Exit on the console or [F5] on the PC when you have finished
renumbering extensions. If you press Home, extensions may remain in
the forced idle condition (indicated when the LED next to each DSS
button is on). To restore extensions to their normal operating state,
restart the system.
3-6 System Renumbering