Attendant Message Waiting - AT&T SYSTEM 25 User Manual

Attendant Message Waiting

You can use a Message light to notify voice terminals of a
waiting message. When you call a voice terminal, the status of
the light next to (ATTENDANT MESSAGE WAITING) will be the same as
the Message light on the voice terminal you call.
Turning on a Message Waiting Light While Ringing the
Voice Terminal
1 If the light is not on, press
2 Hang up.
Turning on a Message Waiting Light Without Ringing
the Voice Terminal
1
2
3
4
(ATTENDANT MESSAGE WAITING).
The light next to this button turns on.
The light next to this button turns off.
the handset and listen for dial tone.
Lift
Press (ATTENDANT MESSAGE WAITING) .
The light next to this button turns on.
Dial the PDC.
Listen for confirmation tone and then
hang up.
The light next to this button turns off.
(Continued)
11