Test Telephone Number - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Test Telephone Number

Test Telephone Number
Use this procedure to assign a test line or trunk telephone number for each
100D module installed in the control unit.
The number assigned to the test line/trunk must be different from the numbers
assigned to other channels in the same B-channel group. It must be the same
number as that provided by the PRI service provider.
Summary: Test Telephone Number
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
9-10 PRI Facilities
System manager
Hybrid/PBX, Key
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Not applicable
Telephone number of up to 12 digits
No
No
LinesTrunks PRI
Drop Dial telephone no.
Enter
Exit
[F4] [F6] [F4]
telephone no. [F10]
Test TelNum
Enter
Type slot no. [F10]
[F5] [F5]
Dial slot no.
Exit
[Alt] + [P] Type