Other Digits - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Other Digits

Other Digits
Use this procedure to specify other (extra) digits that must be added by the
system to the beginning of the number dialed by the caller, when calls are
placed on an identified route.
NOTES:
1. Pool routes must be programmed before you assign other digits.
2. A maximum of 20 digits can be added, in any combination of the digits 0
through 9.
3. Special characters such as switchhook flash, Stop, and # cannot be
included as extra digits. Pause is allowed in every position but the first.
4. Other digits are assigned to Tables 1 through 18.
Summary: Other Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
16-10 Automatic Route Selection
System manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
0
Up to 20 digits (any combination of 0 to 9)
No
No
Sub A Digit or More and Sub BDigit
Tables ARS
Dial table no. and pool route no.
digits to be added
[F8] [F6] [F7] or [PgUp] and [F3]
pool route no. [F10]
[F10] [F5] [F5]
Enter
Enter Exit Exit
Type table no. and
[Alt] + [P] Type digits to be added
Drop Dial