Telephone Number To Send - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Telephone Number to Send

Telephone Number to Send
Use this procedure to assign the telephone number to send to the network
when outgoing calls are made on an ISDN line. If the person being called
subscribes to an automatic number identification service, the number
indicates who is calling.
The number assigned to each channel does not have to be unique because it
is not used for routing.
Summary: Telephone Number to Send
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
No digits are assigned
Up to 12 digits (any combination of 0 to 9)
No
No
LinesTrunks PRI
Drop
Enter
Drop
Enter
Exit
[F4] [F6] [F3]
Type base no.
[F10] [F5] [F5]
NumbrToSend
Dial base no.
Enter
Dial telephone no.
Specify type of no.
[F10] [Alt] + [P]
Specify type of no.
Dial line no.
Enter Exit
[F10] [Alt] + [P]
Type telephone no.
PRI Facilities 9-9