Digit Absorption - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Digit Absorption

Digit Absorption
Use this procedure to specify how many of the digits dialed (0 through 11) by
the caller should be absorbed (not sent to the telephone company's central
office) by the system when a call is made on an identified route.
Entries of 1 through 11 indicate that the system should not send the specified
number of digits, starting with the first digit dialed by the user after the dial-out
code.
Digit absorption is assigned to Tables 1 through 18.
NOTE:
Pool routes must be programmed before you assign digit absorption.
Summary: Digit Absorption
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
0
0 to 11
No
No
SubA Absorb or More and SubB Absorb
Tables ARS
Dial table no. and pool route no.
Dial no. of digits to absorb
[F8] [F6] [F6] or [PgUp] and [F2]
pool route no. [F10]
absorb [F10] [F5]
Enter
Enter Exit
Type table no. and
[Alt] + [P] Type no. of digits to
[F5]
Automatic Route Selection 16-9
Drop
Exit