Host System Dial Codes For Behind Switch Mode - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Host System Dial Codes for Behind Switch Mode

Host System Dial Codes for Behind
Switch Mode
Use this procedure to assign the host system dial codes for the Transfer,
Conference, and Drop features.
When multiline telephone users press the Transfer, Conference, or Drop
button, a signal is sent to the host service and the communications system
features are not accessed. Assigning dial codes to these features ensures
that users can take advantage of them through the host system.
NOTE:
This procedure applies to Behind Switch mode only.
Summary: Host System Dial Codes for Behind
Switch Mode
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
15-22 System Features
System manager
Behind Switch
Not required
Form 1, System Planning
No host dial codes are assigned
Host system dial code of up to 6 digits
No
No
More
Options
Dial host system dial code
[F7] [PgUp] [F2]
host system dial code
Select feature
BehndSwitch
Enter
Select feature [Alt] + [P]
[F10] [F5] [F5]
Drop
Exit Exit
Type