Dlc Operator Positions - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

DLC Operator Positions

DLC Operator Positions
DLC operator positions can be assigned to the first and fifth extension jacks
on the first modules with digital or analog multiline extension jacks. A
maximum of eight DLC operator positions can be assigned. Any combination
of operator positions can be assigned as long as there are no more than four
QCC operator positions and no more than a total of eight operator positions.
Use this procedure to specify extensions that serve as central answering
positions for all incoming calls, for Call Management Systems (CMSs)
connected to operator extension jacks, or as calling group supervisor
extensions. (You do not need to use this procedure in a Key or Behind Switch
system unless you have more than one DLC position.) For a new system,
remove the factory-set DLC operator position assignment for any telephone
not used as an operator position.
Lines and trunks are assigned on individual buttons.
The system programming console can have several incoming calls ringing
simultaneously.
Each CMS requires two DLC operator positions to connect the equipment and
one position to serve as CMS supervisor.
System Operator Positions 4-5