Table of Contents
Advertisement
6 - 22 WiNG 4.4 Switch System Reference Guide
4. Click the
Add
5. Use the
Interface
1-8, up 1, VLAN 1 (plus those VLANs created thus far) and Tunnel n (where n equals the name(s) of those tunnels
created thus far).
6. Use the
IP ACL
7. Use the
MAC ACL
8. Refer to the
Status
goes wrong in the transaction between the applet and the switch.
9. Click
OK
to use the changes to the running configuration and close the dialog.
10.Click
Cancel
6.4.4 Configuring the Role Based Firewall
Use the
Attach Role
To attach a role:
1. Select
Security
2. Click the
Security Policy
button.
drop-down menu to select the interface to configure on the switch. Available options include – ge
drop-down menu to select an IP ACL used as the inbound IP for the layer 2 or layer 3 interface.
drop-down menu to select an MAC ACL used as the MAC IP for the layer 2 interface.
field for the state of the requests made from applet. This field displays error messages if something
to close the dialog without committing updates to the running configuration.
screen to view and assign an ACL to a role.
>
Wireless Firewall
from the main menu tree.
tab.
Advertisement
Table of Contents
Troubleshooting
