RRP 4.3 Registration Clutch
(See
PL 5.1 Paper
Figure 73 Registration Clutch
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Remove the Fuser Assembly (RRP 5.1 Fuser Assembly).
3.
Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect
it from light.
4.
Remove Tray 1.
5.
Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
6.
Remove the Left Side Cover (RRP 1.1 Left Side Cover).
7.
Remove the Top Cover Assembly (RRP 1.3 Top Cover Assembly).
8.
Remove the HVPS Cover (RRP 1.6 HVPS Cover).
9.
Remove the Paper Transport Assembly (RRP 4.1 Paper Transport Assembly)
10.Remove the E-ring that secures the Registration Clutch to the Rubber Registration
Roller.
11.Remove the Registration Clutch.
Replacement
Reinstall the components in the reverse order.
286
Transport)
Phaser 5400 Laser Printer Service Guide