Print Engine Controller Board Test Print; Table 122 Test Print Menu - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

Print Engine Controller Board Test Print

Enter Diagnostics Mode. Refer to
and page 224 for navigating the Diagnostics menu.
The Print Engine Controller Board Test Print is used to bypass the System Controller
Board. The "Print Pattern" test print is an excellent tool for isolating and diagnosing
printer feed, paper path, registration and image-quality problems. Refer to the
Registration section
image registration.
The Control Panel Test Legend to the right will aid in
navigating through the variety of test prints available.
Upon entering Diagnostics Mode, the Control Panel LCD
will momentarily display "Entering IOT Diagnostics
Mode." Then the LCD will display "Main Menu / Component Test.
Note: An asterisk (*) indicates a factory default setting.

Table 122 Test Print Menu

Press [1] or [5] to display: ⇒ Main Menu
Press [2] or [6] to display: ⇓
Test Print
Print Pattern
Input Tray
Output Tray
Test Print
Duplex
By selecting various combinations of Input Tray, Output Tray and Duplex ON/OFF,
you can test most of the printer's functional areas as well as print quality.
Phaser 5400 Laser Printer Service Guide
page 221
page 231 for information on using test prints to help adjust print
Test Print
Press [3] or [7] to display: ⇓
Input Tray
Tray 1*
Input Tray
Tray 2
Input Tray
Tray 3
Input Tray
MBF
(Multi-sheet Bypass Feeder)
Output Tray
Standard*
Output Tray
HCS
Duplex
Off*
Duplex
On
for instructions on entering Diagnostics
On Line Menu Up Item Up Value Up
0 1 2 3
0 1 2 3
4 5 6 7
4 5 6 7
Enter Menu Item Value
Down Down Down
s5400-352
Comment
Press [4] to start the test
print selected.
Note: Print Pattern
generates
continuous test
prints.
Press [0] to stop.
Press [4] to select the
paper feed tray desired.
Press [4] to select the
paper feed tray desired.
Press [4] to select the
paper feed tray desired.
Press [4] to select the
paper feed tray desired.
Press [4] to select the
output Tray desired.
Outputs to the High
Capacity Stacker
Single side printing
Both sides of page
printed
229