Figure 84 Shield Cover; Rrp 6.1 Main Drive Gear Assembly - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 6.1 Main Drive Gear Assembly

(See PL 7.1 Frame &

Figure 84 Shield Cover

Removal
Note: The Drive Gear Assembly includes both the Main Drive
Motor Gear Assembly and Motor Assembly.
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the Lower Rear Cover (RRP 1.7 Lower Rear Cover).
2. Open the Rear Cover.
3. Remove the Fuser Assembly (RRP 5.1 Fuser Assembly).
4. Open the Top Cover and remove the Print Cartridge.
5. Cover the cartridge to protect it from light.
6. Remove Tray 1.
7. Extend the MBF Assembly.
8. Remove the Left Side Cover (RRP 1.1 Left Side Cover).
9. Loosen the two thumb screws and remove the System Controller PWB Shield
Cover.
10.Remove the System Controller PWB (RRP 8.1 System Controller PWB).
Phaser 5400 Laser Printer Service Guide
Drives)
295