Figure 66 Paper Level Indicator Arm; Rrp 3.5 Tray 1 Right Guide Assembly - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 3.5 Tray 1 Right Guide Assembly

(See PL 3.1 Paper

Figure 66 Paper Level Indicator Arm

Removal
Warning: Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover.
2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect
it from light.
3. Remove Tray 1.
4. Remove the Left Side Cover (RRP 1.1 Left Side Cover).
5. Remove the Top Cover Assembly (RRP 1.3 Top Cover Assembly).
6. Remove the Right Side Cover (RRP 1.2 Right Side Cover).
7. Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
8. Remove the Retard Chute Assembly (RRP 3.1 Retard Chute Assembly).
9. Remove Front Cover (RRP 1.4 Front Cover).
10.Carefully push down on the locking tab that secures the rod to the paper level
actuator.
11.Remove the paper level assembly from the stud on the frame.
12.Move the paper level forward to unlatch then remove from the printer.
Phaser 5400 Laser Printer Service Guide
Feeder)
277