RRP 12.15 Paper Height Sensor
(See
PL 12.3 2000-Sheet Feeder (3 of
Figure 157 Paper Height Sensor
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the 2000-Sheet Feeder Tray Assembly (RRP 12.7 Tray Assembly).
2.
Hold the Nudger Assembly down as you release the three locking tabs that secure
the Paper Height Sensor.
3.
Disconnect P/J611 from the sensor.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
4))
367